HEADLIGHT SWITCH
The ignition switch key must be in the ON/RUN
position to operate the headlights. Press the top of the
rocker switch
q
toward the dash to place the
headlights on high beam. Move the rocker switch to
the center position
w
to place the headlights on low
beam. Press the bottom of the rocker switch to turn off
the headlights.
DIRECTION SELECTOR SWITCH
TIP
The malfunction light will illuminate after reversing direction if you press the
accelerator pedal before coming to a complete stop.
Always come to a complete stop before reversing
direction. To choose the forward option, push the top
of the switch
q
. Push the bottom of the switch to
choose reverse operation
e
. When the direction
selector is in the center position
w
, the vehicle is in
neutral. The vehicle will not move if the accelerator is
depressed.
29
FEATURES AND CONTROLS
To Next Page
Loading...