CLEANING AND STORAGE
WASHING THE VEHICLE
Keeping your GEM vehicle clean will not only improve its appearance but it can
also extend the life of various components.
NOTICE
High water pressure may damage components. GEM recommends washing
the vehicle by hand or with a garden hose, using mild soap.
NOTICE
Certain products, including insect repellents and chemicals, will damage
plastic surfaces. Do not allow these types of products to contact the vehicle.
The best and safest way to clean your GEM vehicle is with a garden hose and a
pail of mild soap and water.
1. Use a professional-type washing cloth, cleaning the upper body first and the
lower parts last.
2. Rinse with clean water frequently.
3. Dry surfaces with a chamois to prevent water spots.
If a high pressure water system is used for cleaning (not recommended),
exercise extreme caution. The water may damage components and could
remove paint and labels. Avoid directing the water stream at the following items:
• Wheel bearings
• Transaxle seals
• Brakes
• Cab and body panels
• Labels and decals
• Switches and controls
• Electrical components and wiring
If an informational or graphic label becomes illegible or comes off, contact your
GEM dealer to purchase a replacement. Replacement safety labels are provided
at no charge.
Grease all zerk fittings immediately after washing.
86
MAINTENANCE
To Next Page
Loading...