PARK BRAKE LEVER
To help prevent the vehicle from rolling,
set the park brake
q
when parking the
vehicle. When the park brake is set and
the park brake indicator is illuminated,
motor speed is limited. If the accelerator
is applied, this limiting feature prevents
operation, which protects the park brake
pads from excessive wear.
Always apply the service brakes before
engaging or releasing the park brake.
1. Apply the brakes.
2. Pull the park brake lever upward as far as possible.
3. To release the park brake, apply the brakes. Press the park brake lever
release inward and move the lever downward as far as possible.
TIP
This feature will not operate properly if the park brake connector or switch
(under the hood) malfunctions or becomes disconnected, or if the switch has
moved. Check for disconnection, then see your dealer promptly if this feature
fails to operate properly.
31
FEATURES AND CONTROLS
To Next Page
Loading...