1
SafeNet Luna Network HSM Hardware
Installation
This chapter describes how to install and connect a SafeNet Luna Network HSM. To ensure a successful installation,
perform the following tasks in the order indicated:
1. Ensure that you have all of the required components, as listed in "SafeNet Luna Network HSM Required Items"on
the next page
2. If you plan to mount the hardware in an equipment rack, follow the instructions in "Rack-Mounting the SafeNet Luna
Network HSM"on page 16.
3. Install and connect the hardware, as described in "Installing the SafeNet Luna Network HSM Hardware"on page
23
SafeNet Luna Network HSM Installation Guide
Release 7.0 007-013576-002Rev. A June 2017 Copyright 2001-2017 GemaltoAll rights reserved.
10
To Next Page
Loading...
Need help?
General