GEMAŞ Genel Mühendislik Mekanik San.ve Tic.A.Ş.
İTOB Organize Sanayi Bölgesi 10001 Sok.No:28 Menderes/İZMİR TURKEY
Tel:0232 799 0 333 Fax:0232 799 0 330 www.gemas.com.tr info@gemas.com.tr
ENG GEMAŞ STEAM GENERATOR AND CONTROL PANEL INSTRUCTIONS MANUAL V2.1
Control Panel and Settings
1 – 4x20 Internal LCD screen shows information and
warnings about the device.
2 – The device performs the functions of ON / OFF
(switching on / off), entering the setting menu (the
device is turned off, pressed for 3 seconds when it is
OFF) and selecting the pages and parameters in the
setting menu, confirming and saving the set
parameters.
3 – It performs functions of switching to a sub-page
or parameter in the setup menu and decreasing
parameter values.
4 – It performs the functions of going to the next
page or parameter in the settings menu and
increasing the parameter values.
5 – It performs the functions of exiting the setting
menu or exiting the parameters.
SETUP MENU
The setting menu is an interface with the setting
pages and parameters of the device. It allows the
device to operate at an optimum level with the
changes and adjustments made. The device is
switched off to enter the setup menu. OFF appears
on the LCD screen. The MENU button is kept
pressed for 3 seconds while the device is in OFF
position. The device will automatically switch to the
setting menu.
To Next Page
Loading...