camera, for example: 192.168.2.250.
Subnet Mask
The Subnet Mask field must match the subnet
setting on your LAN. For example: 255.255.255.0.
Gateway
The Gateway is used to forward frames to
destinations in a different subnet on the Internet.
The Gateway setting must be the same with the
gateway used by the PCs on your LAN.
NOTE: make sure that IP address assigned to
the camera will have access to the internet
via the internet gate of your LAN, otherwise
s for outside LAN connecting
might be inaccessible
DNS Server
DNS Server (Domain Name Server) that translates
names to IP addresses. Set the same DNS Server as
the PCs on your LAN.
Video Port
The AV Control Port is used to transmit or receive the
V streaming in the network. The default port
setting is “4321”. If you want to view the video from
To Next Page
Loading...