Using the Camera Viewer
The Camera Viewer Utility allows users to view video up to four cameras.
It also allows users to manual/schedule recording video and playback the
video file. The status of camera viewing such as frame rate, video
received, and etc. are also recorded in time.
There are three ways to run the Camera Viewer Utility as follows.
1. Click “Start”, select “Programs\IP Camera\Camera Viewer” to run the
utility.
2. Double click the “IP Camera Viewer” icon to run the utility.
3. Click “Setting Wizard” from Administrator Utility and follow the
instructions in the utility.
To Next Page
Loading...