Camera Ports
The Camera features three ports and a Reset button.
Ÿ Power
The Power port is where you can connect the power adapter.
Ÿ LAN
The LAN port is where you can connect the Ethernet network
cable.
Ÿ WLAN (Antenna Connector)
This round connection is standard Reverse SMA connector where
any antennas with Reverse SMA connector can connect to the
Internet Camera..
Ÿ Reset
1. If problems occur with your Internet Camera,
press the reset button with a pencil tip (for less
than 2 seconds) and the Internet Camera will
re-boot itself, keeping your original
configurations.
2. If problems persist or you experience extreme
problems or you forgot your password, press the
reset button for longer than 5 seconds and the
Internet Camera will reset itself to the factory
To Next Page
Loading...