Software Installation
Follow the simple steps below to run the Install Wizard to guide you
quickly through the Installation process. The following installation is
implemented in Windows XP. The installation procedures in Windows
2000/Server 2003 are similar.
1. Insert the CD shipped along with the Internet Camera into your
CD-ROM drive. The “Autorun.exe” program should be executed
automatically. If not, run “Autorun.exe” manually from “Autorun”
folder in the CD.
2. The Install Wizard will show four selections, select the program you
want to install or click “Exit” to install the program later. The
following installation steps are the demonstration of “Install
Administrator Utility & Camera Viewer”.
To Next Page