Enter an unused IP Address within the IP address
range used on your LAN. If the IP Address of your
LAN is from the 192.168.2.1 to 192.168.2.254,
you can set an unused IP Address from the
for the camera, for example: 192.168.2.250.
Subnet Mask
The Subnet Mask field must match the subnet
setting on your LAN. For example: 255.255.255.0.
The Gateway is used to forward frames to
destinations in a different subnet on the Internet.
The Gateway setting must be the same with the
gateway used by the PCs on your LAN.
DNS Server
DNS Server (Domain Name Server) that translates
names to IP addresses. Set the same DNS Server
as the PCs on your LAN.
Network Setting
Video Port T
he Video Port is used to transmit or receive the video
streaming in the network. The default port setting is
To Next Page
Loading...