Name
The default camera name is “IC-
recommended to enter a meaningful name for the
The wizard will auto setup an available IP Address
to the camera. For example: if the IP address of the
network is 192.168.2.x, the wizard will search an
unused IP Address from 192.168.2.1 to
192.168.2.250 and assign the camera an available
You are allowed to enter another IP Address to
change the setting.
Subnet Mask The wizard will auto s
earch the Subnet Mask setting
of the network and set the camera in the same
You can enter another Subnet Mask to change the
The wizard will auto search the Gateway setting of
To Next Page
Loading...