Gen16 AE - System Operation: System Information

To Next Page

To Previous Page

System Operation (cont.):

Settings / System Info Menu:

The following selections of the Settings menu are not really “settings” per se; they are informational displays of

the version numbers of various components of your Digital Cymbal Processor. They cannot be changed except

by ﬁrmware updates. They may be required in the event that you need technical support for your DCP.

• Cymbal Processor Firmware Version Number (“Ctlr”) – Displays the currently installed DCP ﬁrmware

version number.

• Cymbal Processor Bootloader Version Number (“boot”) – Displays the currently installed DCP bootloader

version number.

• DSP Firmware Version Number (“dSP”) – Displays the currently installed DSP ﬁrmware version number.

• Hardware Version Number (“hdwr”) – Displays the hardware version number of your DCP.

Note that the System Info can also be read via USB using the AE Cymbals Gen16 DCP Access Tool

application Program for Macintosh® or Windows®, available as a free download from www.gen-16.com.