3 Imaging programs
207723 rev 7
Gendex Dental Systems 33
3.7 SRT™, Scatter Reduction Technology
SRT™, Scatter Reduction Technology software can be
used to reduce the effect of metals and other dense
radiopaque objects on the 3D image. These create
artifacts that are seen typically as stripes and shadows
from the above-mentioned objects. To utilize SRT™ on a
CBCT image may have affect to image reconstruction time
SRT™-button is ON. SRT™-button becomes visible on the
3D modality.
Approved: Laihonen Tuuli 2016-12-02 16:41
Reviewed: Nieminen Timo Antero 2016-12-02 15:31
Approved
See PDM system to determine the status of this document. Printed out: 2017-03-22 10:54:38
D507729, 7
Copyright © 2016 by PaloDEx Group Oy. All rights reserved.
To Next Page
Loading...
