Gendex ORTHORALIX 9200 - Ceph Wiring

9200 Ceph Installation Manual
032-0296-EN Rev 01-4
Ceph Wiring
1. In the overhead, unplug the
existing connections for X37
and pigtail connections and
replace these connections
with the new arm cable X37
and pigtail.
2. Connect X8 Ethernet cable.
3. Connect X14 arm cable.
4.
4
Install ferrite filter on X-37
and X-8 cables which are
provid
ed in the accessory
box.
5.
5
6
Connect X15 arm cable.
6. Connect X29 arm cable.
1
2
3