Genelec 1032A Brochure

6
www.genelec.com
Stand plates 8000 series
Genelec stand plates are designed for use together with the IsoPod that
comes with all 8000 series monitors. The IsoPod allows you to tilt the monitor
for optimal alignment. Simply mount the stand plate onto the 3/8” thread on
the tube and ensure tight screw connection. Place the IsoPod over the four
pins of the stand plate.
8010-408 Stand plate for 6010 Iso-Pod (K&M 19621-329-55)
8020-408 Stand plate for 8020 Iso-Pod (K&M 19622-329-55)
8030-408 Stand plate for 8030 Iso-Pod (K&M 19623-329-55)
8040-408 Stand plate for 8040 Iso-Pod (K&M 19624-329-55)
8050-408 Stand plate for 8050 Iso-Pod (K&M 19625-329-55)
Stand plate for 1032A
Stand plate for 1032A and S30D monitors. To be mounted on a stable  oor
stand, example 8000-409B (K&M 26741-029-55). The stand plate has a 3/8”
thread insert in its centre for further stand assembly. The plate is tiltable 15°
and a rear press  t bar keeps the enclosure securely  xed onto the plate.
1032-450B Stand plate for 1032A (K&M 24455-000-55)
1032-450B.
1032A stand plate mounted
on  oor stand.
stand Plates
Stand plate and
IsoPod assembly.
8000-409B
Associated
product
8030-408 8020-4088040-4088050-408 8010-408

Genelec 1032A Specifications

General

Brand	Genelec
Model	1032A
Category	Speakers
Language	English