Genelec 6010A Setup Guide

18 19Room improvements. Monitor setup guide
Acoustic improvements
Improve the acoustics in your room by following
these steps:
Cut the corners, use MDF or drywall and  ll the
empty space with mineral wool.
Use damping material on the front wall surfaces.
Use damping material on the side walls.
Use diffusive element(s) on the back wall. This can
be e.g. a simple bookself.
Massive layer of damping material at the back of the
room, up to 40-50 cm or more is okay.
Use damping and diffusive material above the
listening position.
The picture shows a 5.1 system. The same rules
apply to a stereo setup.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6

Genelec 6010A Specifications

General

Product color	White
Recommended usage	Other
Suitable for outdoor use	-
Tweeter	Yes
Number of drivers	2
Speaker placement	Tabletop/bookshelf
Audio output channels	1.0 channels
Woofer diameter (imperial)	3 \
Tweeter diameter (imperial)	0.75 \
Impedance	- Ω
Sensitivity	93 dB
Frequency range	73 - 21000 Hz
RMS rated power	24 W
Crossover frequency	3000 Hz
Total Harmonic Distortion (THD)	3 %
Audio RCA inputs	1
Connectivity technology	Wired
AC input voltage	100 - 240 V
Power source type	AC

Weight and Dimensions

Depth	114 mm
Width	121 mm
Height	195 mm
Weight	1400 g