Genelec 6010A Setup Guide

3
Active electronic crossover operating at low signal
levels.
Optimized ampliers. Each transducer is driven by
its own optimized amplier.
Protection circuitry. Sophisticated drive unit
protection circuitry for safe operation.
Room response controls. Precise room response
controls for optimizing in-room performance.
Directivity Control Waveguide DCW for at on- and
off- axis response.
Genelec key technologies ..................... 3
What is a monitor? ............................. 4
Monitoring ............................................. 5
Basics of system setup ...................... 6
Monitor placement ................................ 7
Monitor settings ..................................... 11
Subwoofer placement ........................... 12
Room improvements .......................... 14
Room treatments .................................. 15
Acoustic improvements ........................ 18
Fundamentals ..................................... 20
Monitor listening distance
recommendations ................................. 25
Genelec key technologiesTable of contents
Monitor setup guide2

Genelec 6010A Specifications

General

Product color	White
Recommended usage	Other
Suitable for outdoor use	-
Tweeter	Yes
Number of drivers	2
Speaker placement	Tabletop/bookshelf
Audio output channels	1.0 channels
Woofer diameter (imperial)	3 \
Tweeter diameter (imperial)	0.75 \
Impedance	- Ω
Sensitivity	93 dB
Frequency range	73 - 21000 Hz
RMS rated power	24 W
Crossover frequency	3000 Hz
Total Harmonic Distortion (THD)	3 %
Audio RCA inputs	1
Connectivity technology	Wired
AC input voltage	100 - 240 V
Power source type	AC

Weight and Dimensions

Depth	114 mm
Width	121 mm
Height	195 mm
Weight	1400 g