Genelec 6010A Setup Guide

6 7
Basics of system setup.
Monitor placement
Step 1
Step 2
Step 3
Step 4
Step 1
Step 2
Basics of system setup. Monitor setup guide
Identify your listening
area. Try to have
the listening position
within the front 1/3
of the room. Place
the monitors in 60°
angle and point them
towards the listening
position.
Avoid listening position
closer than 1 m from
any wall.
Find the left-right
symmetry axis of your
room. Establish the
symmetrical listening
position.
Every monitor has a listening distance
recommendation. Place the monitor accordingly.
(see page 25 et seq.).
Step 1
60°
L
R
60°
L
R
›1 m

Genelec 6010A Specifications

General

Product color	White
Recommended usage	Other
Suitable for outdoor use	-
Tweeter	Yes
Number of drivers	2
Speaker placement	Tabletop/bookshelf
Audio output channels	1.0 channels
Woofer diameter (imperial)	3 \
Tweeter diameter (imperial)	0.75 \
Impedance	- Ω
Sensitivity	93 dB
Frequency range	73 - 21000 Hz
RMS rated power	24 W
Crossover frequency	3000 Hz
Total Harmonic Distortion (THD)	3 %
Audio RCA inputs	1
Connectivity technology	Wired
AC input voltage	100 - 240 V
Power source type	AC

Weight and Dimensions

Depth	114 mm
Width	121 mm
Height	195 mm
Weight	1400 g