To Next Page
K
Kimberly LevyDec 3, 2025
Why does my Generac Power Systems MAGNUM MMG75D Portable Generator shut down due to high coolant temperature?
Why does my Generac Power Systems MAGNUM MMG75D Portable Generator shut down due to high coolant temperature?
General| Model | MMG75D |
|---|---|
| Type | Portable Generator |
| Fuel Type | Diesel |
| Starting System | Electric Start |
| Voltage | 120/240 V |
| Frequency | 60 Hz |
| Outlets | 4 x 120V 20A |
| Wheel Kit | Included |
| Engine Type | 4-Cycle |
Explains the safety alert symbol and the meaning of DANGERS, WARNINGS, CAUTIONS, NOTICES, and NOTES.
Details safe operating practices, including unit placement, environmental conditions, and operator awareness.
Covers hazards associated with internal combustion engines and essential safety precautions.
Outlines safety guidelines for qualified personnel performing service or maintenance on the unit.
Provides essential guidelines for safely towing the generator unit, including hitch and trailer checks.
Explains the meaning of various safety and operating decals used on the unit for hazard identification.
Details technical specifications for the MMG75D and MMG100D generator models, including engine and generator data.
Details the auto start controller, its functions, features like the Home button, and its interface for monitoring and control.
Explains the Engine screen on the controller, displaying oil pressure, coolant temperature, and battery voltage.
Details the Generator screen, showing voltage, frequency, amps, and winding configuration.
Provides detailed engine maintenance and instrumentation data, including alarms and gauge readings.
Presents generator maintenance and instrumentation data, including analog meters and bar graphs.
Displays warnings, trips, shutdowns, DTCs, and event logs. Includes Table 1: Diagnostic Trouble Codes.
Explains indicators and status pages related to the Diesel Particulate Filter (DPF) system.
Explains how the controller displays information, handles faults, and can be reset.
Lists essential checks to be completed before starting the unit, applicable to manual and remote starts.
Step-by-step instructions for starting the generator in Manual mode using the control panel.
Explains how to set up and use the unit for automatic starting via a transfer switch or remote signal.
Discusses the function and installation requirements of a transfer switch for standby power applications.
Details how to connect external loads to the generator using connection lugs, emphasizing safety.
Describes the process of adjusting generator output voltage using the Voltage Adjust screen.
Explains the function and operation of the voltage selector switch for choosing output voltage configurations.
Covers automatic and manual exhaust filter cleaning (regeneration) and safety precautions.
Explains the location, activation, and function of the emergency stop switch.
Covers essential safety precautions and general maintenance tasks for reliable operation.
Provides a schedule of recommended maintenance intervals for various components and systems.
Provides a guide for identifying and resolving common problems with the generator unit.
