Need help?Do you have a question about the Generac Power Systems RTS and is the answer not in the manual?
General| Voltage | 120/240V |
|---|---|
| UL Listed | Yes |
| Frequency | 60 Hz |
| Operation | Automatic |
| Certification | UL 1008 |
| Amperage | 200A |
| Phase | Single |
| Enclosure | NEMA 3R |
| Number of Poles | 2 |
Read instructions carefully before installation, operation, or service.
Covers risks associated with generator connection and high voltages.
Manual's purpose and scope for familiarizing personnel with the equipment.
Details the transfer switch mechanism and components like breakers.
Explains the importance of the data decal for proper usage.
Description of the standard UL listed type 3R enclosure.
Guidelines for safe operation and compliance with standards.
Outlines the steps involved in installing the transfer switch.
Procedures for unpacking and checking the transfer switch for damage.
Guidelines for securely mounting the transfer switch enclosure.
Instructions for safely connecting power source and load lines.
Procedures for inspecting and testing the system after installation.
Steps for manually operating the transfer switch.
How to perform voltage checks on the transfer switch.
Testing the generator's performance with loads connected.
Provides the wiring diagram and schematic for the transfer switch.
To Next Page