Generac Power Systems EZ Switch RTS10EZA1

1 of 2
EZ Switch™ Series
Pre-Wired Automatic Transfer Switch
with Built-In Load Center
EZ Switch™
®
EZ Switch™
100 Amp, 250 VAC, NEMA 1
DESCRIPTION
The Generac EZ Switch™ is designed to operate with 8-17kW air-cooled generators. This 100 amp Transfer switch has an
integrated load center for picking up the emergency circuits. It is especially useful where the main service is large and only a
portion of the building load will be served by the generator. It is available with a built in 10, 12, 14 or 16-circuit load center to
supply only those circuits that are essential during an emergency. All standard and load center transfer switches are UL and CUL
Listed and suitable for use as optional standby systems (NEC702).
STANDARD FEATURES
All EZ Switches are housed in a steel NEMA 1 enclosure, with electrostatically applied and baked powder paint. The Heavy Duty
Generac Contactor is a UL recognized device, designed for years of service. The control at the generator handles all the timing,
sensing and exercising functions.
Model RTS10EZA1 – 10 Circuit Switch
Model RTS12EZA1 – 12 Circuit Switch
Model RTS14EZA1 – 14 Circuit Switch
Model RTS16EZA1 – 16 Circuit Switch
CONTACTOR RATING
The transfer switch contactor is rated at 250 VAC and is available in a single phase configuration only.

Generac Power Systems EZ Switch RTS10EZA1 Specifications

General

Brand	Generac Power Systems
Model	EZ Switch RTS10EZA1
Category	Switch
Language	English

Summary

Generac EZ Switch Series Overview

Product Description

Details the EZ Switch's design for 8-17kW generators, load center integration, and suitability for essential circuits.

Standard Features

Highlights the steel NEMA 1 enclosure, powder paint, heavy-duty contactor, and generator-based control functions.

Contactor Rating

Specifies the transfer switch contactor is rated at 250 VAC and available in single-phase configuration.

EZ Switch Functions and Specifications

Product Functions

Outlines timing and sensing functions originating from the generator controller for utility drop-out and re-transfer.

Technical Specifications

Details voltage, circuit counts, amperage, phase, frequency, enclosure type, and lug range for various models.

Key Features

Lists electrically operated contacts, load rating, two-pole contactors, transfer time, dual coil design, and warranty.

Dimensions and Wire Ranges

Provides mechanical dimensions (height, width, depth) and terminal wire ranges for different EZ Switch models.