Need help?Do you have a question about the Generac Power Systems Automatic Transfer Switch and is the answer not in the manual?
General| Phase | Single-Phase, Three-Phase |
|---|---|
| Dimensions | Varies by model |
| Weight | Varies by model |
| Amperage | 100A, 200A, 400A, 600A, 800A, 1000A |
| Voltage | 120/240V |
| NEMA Rating | NEMA 3R |
| Switch Type | Automatic |
Safely connect utility, generator, and load power lines, observing voltage warnings.
Manages generator loads by shedding based on frequency to prevent overload.
Inspect installation and perform functional tests carefully in sequence.
How to manually switch between utility and standby power sources without load.
Testing generator performance and stability with applied electrical loads.
Using the test button to verify load shed functions and status LEDs.
To Next Page