To Next PageTo Next Page
Need help?Do you have a question about the Generac Power Systems RTSW200G3 and is the answer not in the manual?
General| Model | RTSW200G3 |
|---|---|
| Type | Transfer Switch |
| Amperage | 200A |
| Voltage | 120/240V |
| Phases | Single Phase |
| Poles | 2 |
| NEMA Rating | NEMA 3R |
| Frequency | 60 Hz |
| Enclosure Type | Outdoor |
Outlines essential safety guidelines, warnings, and hazard definitions (DANGER, WARNING, CAUTION) for equipment operation.
Explains hazard symbols and their associated risks, including electrocution, equipment damage, and injury.
Details potential hazards associated with generator backup power systems, high voltages, and electrical shock.
Provides critical safety advice for operating the transfer switch, referencing relevant codes and standards.
Guides users through inspecting the installation and performing functional tests after switch interconnection.
Explains how to manually operate the transfer switch using the provided handle, with important safety precautions.
Outlines steps for testing the generator's performance when connected to electrical loads.
