Genesis Technologies GT-2.0 User Manual

17
Placing a call with the GT-2.0
Using the Radio and Remote Control buttons
To place a call using the GT-2.0 with a paired Bluetooth
®
enabled cell phone first enable the GT-2.0 Bluetooth
®
mode
by pressing the “MODE” button or by pressing the “Bluetooth
®
”
button until “BT” and “LINK OK” appears on the GT-2.0 display.
Using the GT-2.0 remote control’s keypad dial the desired phone
number. Press the button marked “NEXT” to initiate the call.
To end the call press the button marked “PREVIOUS”.
To redial the last call press the button marked “NEXT”.
Receiving a call with the GT-2.0
Using the Radio Buttons
To receive an incoming call while the GT-2.0 is paired with
Bluetooth
®
enabled cell phone press the button marked “NEXT”.
To end the call press the button marked “PREVIOUS”.
MODE
NEXT
PREVIOUS
OR
Press the
“MODE” button
or press the
“Bluetooth
®
”
button
1
Use remote
control keypad
dial the desired
phone number
Press the button
marked “NEXT”
to initiate the call.
To end the
call press the
button marked
“PREVIOUS”.
NEXT
Press the button marked
“NEXT” to receive an
incoming call.
PREVIOUS
To end the call press
the button marked
“PREVIOUS”.
PLACING A CALL - GT-2.0

Genesis Technologies GT-2.0 Specifications

General

Brand	Genesis Technologies
Model	GT-2.0
Category	Receiver
Language	English