18
Placing a call with the GT-2.0
Using the Remote buttons
To place a call using the GT-2.0 with a paired Bluetooth
®
enabled cell phone press the remote button marked “INPUT”
until “BT” and “LINK OK” appear on the GT-2.0 display.
Using the remote numeric keys dial the desired phone number
then press the remote button marked “NEXT” to initiate the call.
To end the call press the remote button marked “PREVIOUS”.
Receiving a call with the GT-2.0
Using Remote Buttons
To receive an incoming call while the GT-2.0 is paired with
Bluetooth
®
enabled cell phone press the remote button
marked “NEXT”.
To end the call press the remote button marked “PREVIOUS”.
Special dialing REMOTE keypad functions
To clear an entry press the button marked SETUP
To type star (*) press the button marked FF
To type pound (#) press the button marked FR
PLACING A CALL - REMOTE
INPUT
NEXT
PREVIOUS
SETUP FF FR
DISPLAY
RADIO INPUT
BAND