31
GT-2.0 SPECIFICATIONS
Overall Dimensions 9-5/8” (W) x 8-1/2” (H) x 6” (D)
Mounting Dimensions 7-3/4” (W) x 7-1/2” (H) x 5” (D)
Net Weight 5lbs (2.3Kg)
Voltage 12V DC Negative Ground (11.0V - 15.0V allowable)
Maximum Current Consumption 9A
Total Continuous Power Output 50W
Load Impedance 4Ω (4-8Ω allowable)
Total harmonic distortion Typical 0.02% Maximum 0.3%
DVD Deck Section, Discs Played DVD, MP3, MP4, CD, CD-R, CD-RW, JPEG-CD
Video System AUTO / PAL / NTSC
Video Section 4:3 Letter Box and 4:3 Pan Scan, 16:9
Video Output level 1.0Vp-p +/-0.2V 75ohms
AM Tuner Section, Frequency Range 530 - 1710KHz (U.S.A.)
FM Tuner Section, Frequency Range 87.5-107.9MHz (U.S.A).
Bluetooth
®
Version 2.0, Class ll
Advanced Audio Distribution OPP, OBEX, SPP, A2DP, AVRCP
15.19 Labeling requirements.
(a) In addition to the requirements in part 2 of this
chapter, a device subject to certification, or verification
shall be labeled as follows.
(1) Receivers associated with the operation of a
licensed radio service, e.g., FM broadcast under part
73 of this chapter, land mobile operation under part
90, etc., shall bear the following statement in a con-
spicuous location on the device: This device complies
with art 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful
interference.
(2) A stand-alone cable input selector switch, shall
bear the following statement in a conspicuous location
on the device: This device is verified to comply with
part 15 of the FCC Rules for use with cable television
service.
(3) All other devices shall bear the following statement
in a conspicuous location on the device:
This devise complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause unde-
sired operation.
FCC COMPLIANCE
To Next Page
Loading...