20
BAND
Once the radio is selected, this button allows you to select
FM1, FM2, FM3, AM1, AM2. Push the “RADIO” button and
the unit switches to Radio immediately. During radio mode,
press “RADIO” again to switch receiving band.
NAVIGATION BUTTONS
Press the appropriate button to move around any menus that are
selected on screen. Center button is the “select / enter” button.
ENTER
Use to finalize selection.
SETUP
Press the “SETUP” button to activate the System Setup on
screen display Video Monitor menu . Use the NAVIGATION
buttons to navigate the OSD menu options.
SLOW
Pressing the SLOW button while in DVD mode turns on
slow motion play back in steps of 1/2, 1/3,1/4,1/5 and 1/6 of
standard play speed.
VOLUME
Press the “VOLUME” (+ or -) button to increase or
G
J
H
I
K
L
M
N
decrease the volume level respectively.
AUDIO - DVD Only
Adjusts the surround sound mode as well as selects the
language. Must be set before play.
SOUND
Radio Mode: Repeatedly pressing the “SOUND” button
moves you through 6 modes. VOLUME, BASS, TREBLE,
BALANCE, EQ and TIME. Adjustment in anyone of these
modes is done by pressing the “VOLUME” (+ or -) key.
Controls can be modified differently for each room.
REPEAT
DVD Mode: Press “REPEAT” to repeat
the current track being played. Press it twice to repeat play-
ing all of the tracks.
CD, MP3, VCD Mode: Press “REPEAT” to repeat the cur-
rent track being played. Press it twice to cancel the repeat
function.
0-9 NUMBERS
Radio Mode: You can select one of the 9 stored stations on
each band by pressing any one of the number buttons (1-9).
O
P
REMOTE CONTROL Guide
To Next Page
Loading...
Need help?
General