22
8
9
:
PROGRAM
CD/VCD: You can set the program order to play, by
following the steps below. Press “PROGRAM” button and
the LCD displays programming P00:00. You can set the
program order to play them by using (0-10+) number
button, and then press “PLAY/PAUSE” to play.
Note:
(1) Program does not function in playing MP3.
(2) CD Only- Allows you to re-arrange the play
back order of the individual tracks differently
from the order on the original disc.
(3) If there are mistakes in programs, you can
press “PROGRAM” button again then press
“PROGRAM” button to play in order.
STOP
DVD, VCD, CD: Press “STOP” to suspend playback mode.
STOP will display on the TV Screen. Pressing “STOP” a
second time will end all disc playback.
PLAY / PAUSE
Press “PLAY/PAUSE” button to suspend the playback of
CD, MP3, MP4, VCD and DVD media. Press it again to
return to normal playback mode.
10+
Radio: N/A
Disc: Press the 10+ button to select tracks numbered higher
than 100 on MP3s.
SLEEP
Selects timing for delayed turn-off mode. Available
increments 90, 80, 70, 60, 50, 40, 30, 20 and 10 Minutes.
MUTE / BC
Press the “MUTE” button to turn off the sound in all rooms
A, B, and C. Press it again to resume the previous sound
levels. Pressing the BC button for 5 seconds returns the
system to default settings.
REMOTE CONTROL Guide
X
Y
Z
To Next Page
Loading...
Need help?
General