FINGERPRINT AUTHENTICATION SYSTEM (if equipped)
POWER OUTLET
12 I Quick Reference Guide
FEATURES AND CONTROLS
Front Outlet
Luggage Compartment Outlet
The power outlet is designed to provide power for mobile telephones or
other devices designed to operate with vehicle electrical systems.
The devices should draw less than 180 watts with the engine running.
Fingerprint authentication system allows the driver to start the engine,
have access to personal information, unlock profile and exit valet mode
with a enrolled fingerprint.
Fingerprint Authentication
System Settings
To use the system, the driver’s
fingerprint should be enrolled in the
driver’s profile. The drivers can set
or delete their fingerprint through
the infotainment system. Follow
the following procedure.
1. Turn on the vehicle with a smart key. (Both Smartkeys must be
present to save a fingerprint).
2. Select Setup > User Profile Settings > Driver 1 > Fingerprint
identification > Set / Delete Fingerprint > Set in the infotainment
system screen.
3. Place your finger that you wish to enroll on the fingerprint sensor.
4. Following the instructions, place several parts of your fingerprint
until the scanning process is complete.
5. Once the scanning process is completed, the message ‘Saving
fingerprint….’ appears and the fingerprint enrollment process is
proceeded.
6. When the fingerprint enrollment process is completed in the
vehicle, the status is displayed on the infotainment system.
To Next Page
Loading...
