Comfortable stretch is a function that
helps relieve fatigue of the driver’s
pelvis and lower back due to driving.
Every time you press the button, you
may select a mode or turn off the
function in the following order:
Pelvic Lumbar Whole Body OFFStretching > Stretching > Stretching >
Comfortable Stretch
Normal
Comfortable Stretch (if equipped)
06 I Quick Reference Guide
FEATURES AND CONTROLS
To Raise Headrest:
Pull headrest up.
To lower Headrest:
Press lock button while
pressing down on headrest.
To adjust headrest forward
(front seats only):
Pull forward to 1 of 3 positions.
To adjust headrest rearward
(front seats only):
Pull it fully forward to the
farthest position and release it.
A
A
B
3
4
HEADREST ADJUSTMENT
B
C
C
1
2
3
RETURN
4
DRIVER POSITION MEMORY SYSTEM (if equipped)
To Store Settings
1. Shift to P (Park) while the
Engine Start/Stop button
is in the ON position.
2. Adjust the driver’s seat position, outer side view mirror position,
steering wheel position.
3. Press the SET button. The system will beep once and notify you ‘Press
button to save settings’ on the cluster LCD display.
4. Press one of the memory buttons (1 or 2) within 4 seconds. The system
will beep twice when the memory has been successfully stored.
5. ‘Driver 1 (or 2) settings saved’ will appear on the cluster LCD display. The
message appears only for the driver’s seat position memory setting.
NOTE: Transmission must be in P (Park).
NOTE: Two memory seats can be saved per Driver Profile.
So, maximum 6, since there are two Driver Profiles and one Guest.
To Recall: Press the desired memory button (1 or 2). The system will beep once.
NOTE: To reset the system, please refer to the Owner’s Manual.
To Next Page
Loading...
