HOMELINK
STEP 6: Rolling Code Programming - At the garage door opener motor,
(security gate motor, etc.) locate the or'Learn', 'Smart', 'Set'
'Program' button. This can usually be found where the hanging
antenna wire is attached to the motor-head unit (see the
device's manual to identify this button). The name and color of
the button may vary by manufacturer.
STEP 7 'Learn', 'Smart', 'Set' 'Program': Firmly press and release the or
button. You now have up to 30 seconds in which to complete
the next step.
STEP 8: Return to the vehicle, firmly press, hold for 2 seconds and
release, the HomeLink button up to three times in a row slowly.
Do not press the HomeLink button rapidly. As soon as you see
the garage door start to move, stop pressing any buttons until a
few seconds after the garage door has come to a complete
stop, regardless of position. At this point, programming is
complete and your device should operate when the HomeLink
button is pressed and released.
Learn,
Smart,
Set, or
Program
button.
Indicator & :
Flashes in ORANGE - Closing or Opening
Two-Way Communication
•
•
Solid GREEN - Closed or Opened
Some new garage door openers come equipped with a two-way
communication feature. If your garage door opener has this feature,
please also continue to follow the STEP 6: Rolling Code Programming
steps.
For more information and programming tips on two-way
communication please visit www.homelink.com/compatible/two-
waycommunication or call (800)-355-3515.
1
4
1
4
6
6
For information
scan the QR code
using your
smartphone.
GENESIS GV70
Quick Reference Guide I 15
FEATURES AND CONTROLS
To Next Page
Loading...
