Genesis GV70 2025 - Page 19

GENESIS GV70
Quick Reference Guide I 17
FEATURES AND CONTROLS
Defogging
Pressing the OFF button will
place the system in below
settings.
● Front blower will turn off.
● Outside (fresh) air position
will be selected.
● Vented air will be at last set
temperature.
NOTE: To reduce window fogging and improve visibility, keep the
interior surface of the windshield clean by wiping it with a clean cloth
and glass cleaner. In addition, position the air intake control to circulate
fresh air whenever possible while operating the vehicle.
Mode Selection
Direction of air flow
will change
depending on
which vent
direction arrow is
selected.
1. Press the front
defrost button.
2. Select the desired
temperature.
3. Fresh mode will
be selected
automatically.
Air Intake Control
1. Press the front defrost
button.
2. Set temperature to
warmest setting (HI).
3. Press the defroster button.
4. Fresh mode will be
selected automatically.
When Recirculation mode is
selected, air from the passenger
compartment will be recircu-
lated through the system and
heated or cooled according to
the function selected.
NOTE: Use a microfiber towel to prevent scratches on the climate controls
while removing fingerprints, dust, or stains. Immediately wipe off any
interior cleaning products to prevent damage to the climate controls.
When Fresh mode is selected, air
enters the vehicle from outside
and is heated or cooled according
to the function selected.
Defrosting
System Off
Recirculation mode
Fresh mode