To Store Settings
1. Shift to P (Park) while the Engine
Start/Stop button is in the ON
position.
2. Adjust the driver’s seat position,
outer side view mirror position,
steering wheel position, instrument
panel illumination intensity and
head-up display height/brightness
to the desired position.
DRIVER POSITION MEMORY SYSTEM
NOTE: To reset the system, please
refer to the Owner’s Manual.
3. Press the SET button. The system will beep once and notify you ‘Press
button to save settings’ on the cluster LCD display.
4. Press one of the memory buttons (1 or 2) within 4 seconds. The system will
beep twice when the memory has been successfully stored.
5. ‘Driver 1 (or 2) settings saved’ will appear on the cluster LCD display. The
message appears only for the driver’s seat position memory setting.
NOTE: Transmission must be in P (Park).
To Recall: Press the desired memory button (1 or 2). The system will beep once.
EASY ACCESS AND EXIT
Seat Easy Access function can be set from the Settings menu in the
infotainment system screen. Select:
Driver seat: Setup > Vehicle > Seat > Seating Easy Access > Driver Seat
Easy Access > Normal/Extended/Off
Steering wheel: Setup > Vehicle > Seat > Seat Easy Access > Steering
easy access
SEAT HEAT/COOL SETTINGS
Touch and hold seat warmer / cooler icon to turn function OFF.
Touch either of the seat
cooler icons to cool
the driver’s seat or front
passenger’s seat.
Touch either of the seat
warmer icons to warm
the driver’s seat or front
passenger’s seat.
Seat Warmer Seat Cooler
OFF
HIGH
MED
LOW
1
To Next Page
Loading...
