Genesis GV80 2024 - Smart Cruise Control [SCC]

34
4 DRIVING
SMART CRUISE CONTROL (SCC)
Adjusting the vehicle speed
1. Push switch UP to increase set speed.+
2. Push switch DOWN to decrease set speed.-
1
2
NOTE: Quick push up/down will change speed by 1 mph. Holding
switch up/down will change speed by 5 mph.
Smart Cruise Control helps maintain
distance from the vehicle ahead and drive
at a speed, set by the driver.
To turn on SCC:
1. Press the Driving Assist button to
turn on SCC. The speed will be set to
the current speed on the cluster.
2. If there is no vehicle in front of you, the
set speed will be maintained, but if
there is a vehicle in front of you, the
speed may decrease to maintain the
distance to the vehicle ahead. If the
vehicle ahead accelerates, your vehicle
will accelerate.
To set vehicle distance:
Each time the distance button is pressed,
the vehicle to vehicle distance changes as
follows:
Press the switch or depress
the brake pedal to temporarily
cancel SCC.
To turn off SCC
Press the Driving Assist button
to turn SCC off.
DISTANCE 3DISTANCE 4
DISTANCE 2DISTANCE 1
To temporarily cancel SCC
+
-
+
-
1
2