Genesis GV80 2024 - Auto Hold; Shift by Wire

30
4 DRIVING
SHIFT BY WIRE
To shift the gear to P (Park), press the P
button while depressing the brake pedal.
When car is parked:
To shift the gear to N (Neutral), rotate
the shift dial clockwise from R (Reverse)
or counterclockwise from D (Drive) while
depressing the brake pedal.
When car is moving:
To shift the gear to N (Neutral), rotate
the shift dial clockwise from R (Reverse)
or counterclockwise from D (Drive).
To shift the gear to R (Rear), rotate the
shift dial counterclockwise while
depressing the brake pedal.
A
Rotary shifter
(Rotary gear shift dial)
Park button
P (PARK) Release Cap
AUTO HOLD
To cancel, press the AUTO HOLD
switch again.
1. Press the AUTO HOLD
switch.
2. Stop the vehicle by pressing
the brake pedal. The brakes
will remain engaged even if
the brake pedal is released.
3. The brakes will release
when the accelerator pedal
is pressed with transmission
in D, R or manual mode.
WHITE
GREEN
WHITE
The Auto Hold feature assists in
steep hill areas. It holds the brake until
the accelerator pedal is pressed.
P
A
B
C
R
AUTO
HOLD
N
D
P
R
AUT
O
HOLD
B
C