Defogging
System Off
Pressing the OFF button will
place the system in below
settings.
Direction of air flow will change
depending on which vent
direction arrow is selected.
Mode Selection
NOTE: To reduce window fogging and improve visibility, keep the
interior surface of the windshield clean by wiping it with a clean cloth
and glass cleaner. In addition, position the air intake control to circulate
fresh air whenever possible while operating the vehicle.
1. Press the front
defrost button
2. Select the desired
temperature
3. Fresh mode will
be selected
automatically
1. Press the front defrost
button
2. Set temperature to
warmest setting (HI)
3. Press the defroster button
4. Fresh mode will be
selected automatically
Air Intake Control
When Fresh mode is selected, air
enters the vehicle from outside
and is heated or cooled
according to the function
selected.
When Recirculation mode is
selected, air from the passenger
compartment will be recirculated
through the system and heated
or cooled according to the
function selected.
Recirculation mode
Fresh mode
NOTE: Use a microfiber towel to prevent scratches on the climate
controls while removing fingerprints, dust, or stains. Immediately wipe off
any interior cleaning products to prevent damage to the climate controls.
Defrosting
• Front blower will turn off.
• Outside (fresh) air position
will be selected.
• Vented air will be at last set
temperature.
18
4 FEATURES AND CONTROLS
To Next Page
Loading...
