27
GENESIS GV80
Rolling Code Programming
NOTE: If your garage door opener has two-way communication
functionality, it is possible for HomeLink to stop operating correctly shortly
after programming, if the initial programming was not completed properly.
If you experience this, completing the steps described in “Programming a
New HomeLink Button” and “Two-way Communication Programming” will
restore the garage door function.
Firmly press and release the “Learn”, Smart”, or “Program” button of
garage door opener on the ceiling,while the indicator flashes in Green.
Once the button is pressed, you have approximately 30 seconds to
initiate the next step.
7
Return to the vehicle and firmly press the HomeLink button, hold for
two seconds and release the button up to three times. Do not press
the HomeLink button rapidly. At this point programming is complete
and your device should operate.
For more detailed information,
please refer to your Owner’s
manual or visit www.homelink.com
or call (800) 355-3515.
• You may need help from a second person.
• You may need a ladder to access your garage door opener.
• Be prepared: some of the steps are time sensitive.
1.
2.
8
8
For more information and programming tips on two-way
communication, visit:
www.homelink.com/compatible/two-waycommunication
or call: 800-355-3515.
HOMELINK
4 INFOTAINMENT
To Next Page
Loading...
