33
/
Lubrication
Lubrication plan
What is to be lubricated? At what intervals? Which lubricants are used?
Chain After cleaning to remove dirt, after riding in the rain, every 250 km Chain oil
Brake and gear cables When their performance deteriorates, once a year Silicon-free grease
Wheel bearings, pedal bearings,
bottom bracket
Once a year Bearing grease
Suspension elements After cleaning to remove dirt, after riding in the rain, as prescribed by the
manufacturer
Special spraying oil
Thread in case of installation During installation Installation grease
Contact surfaces of carbon bre
parts
During installation Carbon bre installation paste
Sliding surfaces of quick releases Once a year Grease, spray oil
Metal seat posts in the metal frame During installation Grease
Joints of gear systems When their performance deteriorates, once a year spray lubricant
Joints of brake systems When their performance deteriorates, once a year spray lubricant
Joints in the full suspension frame When their performance deteriorates, when dirty According to the manufacturer‘s
instructions
Working on the bicycle requires special knowledge, experience and special tools! Only
allow specialists to work or check key parts on the bicycle!
To Next Page
Loading...
