Genesis Mountain - Loose Accessories; Loose Luggage Rack; Bar Ends

35
/
Loose luggage rack
Only install children‘s trailers on bicy-
cles which are suitable for this kind
of equipment. Only use the intended
fastening options. Ask your specialist dealer
whether and how luggage may be transport-
ed when you have a frame and components
made of carbon bre. Never attach a baggage
rack to the seat post! It is not designed for this
purpose. Subjecting this part of the bicycle to
excess weight with a rack can lead to breaks
in the seat post and serious falls!
You always have to t the enclosed
accessories in line with the guide-
lines and instructions. You have to
ensure that screwed connections are secured
with the correct torque (see page 34 “Torques
for bolted connections”).
• Only use add-on parts which satisfy the
requirements of the applicable legal guide-
lines and road trafc regulations.
• The use of unauthorised accessories
may lead to accidents or severe falls. You
should therefore only use original accesso-
ries and add-on parts which t your bicycle.
• Allow a specialist retailer to advise you.
Loose accessories
Bar ends
Bar ends always have to be attached
to the handlebars with the correct
torque, otherwise this can cause
falls. Before tting the bar ends, please in-
form yourself whether the add-on has been
approved by the handlebar manufacturer, as
only then may the bar ends be tted.
You can not combine every frame
and part made of carbon ber! Read
the manuals of the manufacturers
and ask your specialized dealer.
When loading luggage racks, please
make sure not to cover front or rear
lights or reectors!
Avoid uneven loading of the luggage racks.
* see page 34