Need help?Do you have a question about the GENEVO PRO and is the answer not in the manual?
General| GPS | Yes |
|---|---|
| Display | OLED |
| False Alert Filtering | Yes |
| Power Supply | 12V DC |
| Speed Camera Database | Yes |
| Red Light Camera Database | Yes |
| Voice Alerts | Yes |
| Sensitivity | Adjustable |
| Auto Mute | Yes |
| Detection Bands | X, K, Ka |
| Sensitivity Modes | City, Highway |
| Firmware Updates | Via USB |
| Frequency Range | Laser: 904 nm |
Explains the detector's primary functions and detection capabilities.
Details text and voice alerts, signal strength levels, and alert types.
Describes the function of each button for device control.
Explains how to access, navigate, and change settings within the menu.
Configures front/rear radar detection and sensitivity modes like Highway, City, Auto City.
Allows selection and filtering for various radar bands (K, Ka, MR, Gatso RT3/RT4).
Configures laser detection and filtering for MultaRadar (MR) bands.
Adjusts display settings, alert preferences, GPS warning, and units of measurement.
Activates a mode that disables radar/laser detection for specific regions.
Details the operating frequencies for GPS, Ka narrow/wide, and K narrow/wide bands.
Provides operational voltage, energy consumption, and physical dimensions.
Guides users on how to check for and download database updates.
Illustrates the recommended placement of all components within the vehicle.
Details installation of the main control unit and the display unit.
Provides instructions for placing and connecting the GPS antenna.
Explains the mounting of the speaker and radar antenna components.
Covers the installation of the laser system control unit and sensors.
To Next Page
