GENEVO
G
Setting local time: You can change time zone via ⋀⋁
Language: English / Deutsch / Czech
Factory reset: For reset press .third button
Delete all user points: For deleting all user points press .third button
S/N: XXXXX - Displays you Serial Number, that might be needed for you Genevo PRO Update
SpeedMeter Option:
This function is intended for the legalization of the detector when used in countries where radar detectors are prohibited.
The detector stops alerting to radars and lasers. Nothing but your current speed will appear on the display and all radar and
laser detection settings will disappear from the menu. When entering the menu, you will be notified of deactivated
functions. To activate the Speedmeter, you must have the detector switched on and press and hold together and the second
third button on the display for five seconds. Then (SpeedMeter ON) appears on the display and the radar and laser detection
functions are completely deactivated. To re-activate the detector, simply update it the usual way through the computer and
all functions will be available again.
Radar Detector Genevo PRO 7
To Next Page
Loading...
