CONTROLS
Circuit Breaker
The circuit breaker will automatically switch OFF if there is a short circuit or a
significant overload of the generator at the receptacle. If the circuit breaker is
switched OFF automatically, check that the appliance is working properly and
does not exceed the rated load capacity of the circuit before switching the circuit
breaker ON again.
Ground Terminal
The generator ground terminal is connected to the frame of
the generator, the
metal non-current carrying parts of the generator, and the ground terminals of
each receptacle.
Oil Alert System
The Oil Alert system is designed to prevent engine damage caused by an
insufficient amount of oil in the crankcase. Before the oil level in the crankcase
can fall below a safe limit, the Oil Alert system will automatically shut down the
engine (the engine switch will remain in the ON position).
9
CIRCUIT BREAKER
Ground Terminal
To Next Page
Loading...