Genex SG7600EX - Transporting; Storage

TRANSPORTING / STORAGE
When transporting the generator, turn the engine switch and the fuel valve OFF.
Keep the generator level to prevent fuel spillage.
Contact with a hot engine or exhaust system can cause
serious burns or fires. Let the engine cool before transporting or storing the
generator.
Take care not to drop or strike the generator when transporting. Do not place
heavy objects on the generator.
Before storing the unit for an extended period:
1. Make sure the storage area is free of excessive humidity and dust.
2. Service according to the table below.
Storage Time
Recommended service procedure to prevent hard
starting
Less than 1 month
No preparation required
1 to 2 months
Fill with fresh gasoline and add gasoline conditioner
2 months to 1 year
Fill with fresh gasoline and add gasoline conditioner.
Drain the carburetor float bowl.
Drain the fuel sediment cup.
1 year or more
Fill with fresh gasoline and add gasoline conditioner.
Drain the carburetor float bowl.
Drain the fuel sediment cup.
Remover the spark plug. Put a tablespoon of engine oil
into the cylinder. Turn the engine slowly with the pull rope
to distribute the oil. Reinstall the spark plug.
Change the engine oil.
After removal from storage, drain the stored gasoline into
a suitable container and fill with fresh gasoline before
starting.
*Use gasoline conditioners that are formulated to extend storage life.
Contact your authorized GENEX generator dealer for conditioner
recommendations.
27