MAINTENANCE
Fuel Sediment Cup Cleaning
The sediment cup prevents dirt or water which may be in the fuel tank from
entering the carburetor. If the engine has not been run for a long time, the
sediment cup should be cleaned.
1. Turn the fuel valve to the OFF position, Remove the sediment cup, O-ring and
filter.
2. Clean the sediment cup, O-ring, and filter in nonflammable or high flash point
solvent.
3. Reinstall the filter, O-ring, and sediment cup.
4. Turn the fuel valve ON and check for leaks.
24
To Next Page
Loading...