Genex SG7600EX - Disconnecting the Battery Cables

To Next Page

To Previous Page

GENERATOR USE

Disconnecting the battery cables:

1. Stop the engine.

2. Disconnect the negative (-) battery cable from the generator negative (-)

terminal.

3. Disconnect the other end of the negative (-) battery cable from the battery

negative (-) terminal.

4. Disconnect the positive (+) battery cable from the generator positive (+)

terminal.

5. Disconnect the other end of the positive (+) battery cable to the battery positive

(+) terminal.

6. Connect the vehicle ground cable to the battery negative (-) terminal.

7. Reconnect the vehicle grounded battery cable.