To Next PageTo Next PageWhy is my Genie 3055 running slowly?
If your Genie door opener is running slowly: * Check the operating condition of the door. The door may need professional repair or adjustment. * Verify that the opener is not installed on a one-piece door, as it is not designed for this type of door.
How to fix Genie 3055 that works with wall control but not remote?
If your Genie garage door opener operates with the wall control but not the remote, here are a few things to try: * Check all remotes. * Replace the remote battery. * Program the remotes to the powerhead.
General| Model | 3055 |
|---|---|
| Motor | DC Motor |
| Horsepower | 1/2 HP |
| Voltage | 120V |
| Lift Capacity | Up to 7 Feet |
| Speed | 7 Inches per Second |
| Safety Sensors | Included |
| Safety Features | Safe-T-Beam System |
| Remote Controls | 2 Remote Controls Included |
Details potential dangers associated with garage doors and openers, including moving parts and electrical hazards.
Provides critical safety guidelines for operating and maintaining garage door openers to prevent injury or death.
Key instructions and warnings for safe and proper installation of the garage door opener unit.
Description of the non-contact reversing system that prevents door closure if an obstruction is detected.
Instructions for setting the down and up travel limits to ensure proper door movement.
Procedures for setting force controls and performing contact reverse tests for safe operation.
A table detailing powerhead LED states, possible problems, and recommended solutions for troubleshooting.
Step-by-step instructions for installing the Genie Battery Backup unit onto the powerhead.
Detailed steps for programming the wireless keypad, including PIN setup and multi-door operation.
Step-by-step instructions for programming a 3-button remote control to the garage door opener.
