Need help?Do you have a question about the Genie C41W and is the answer not in the manual?
Connect power, HDMI, and power on the Wireless Genie Mini and TV at its location.
Confirm the Wireless Signal Strength icon displays three green bars and the WGM LED is green.
Navigate the Genie HD DVR menu to initiate the 'Add a Client' process and note the PIN.
Enter the noted PIN on the WGM, follow onscreen prompts for location and settings.
Return to the Genie HD DVR, select DONE on the Add a Client screen to confirm WGMs.
Connect power, HDMI, and power on the Wireless Genie Mini and TV at its location.
Confirm the Wireless Signal Strength icon displays three green bars and the WGM LED is green.
Navigate the Genie HD DVR menu to initiate the 'Add a Client' process and note the PIN.
Enter the noted PIN on the WGM, follow onscreen prompts for location and settings.
Return to the Genie HD DVR, select DONE on the Add a Client screen to confirm WGMs.
To Next Page
General
