See the panels that follow for complete instructions.
OVERVIEW
This Installation Guide will show you how to connect your DIRECTV
®
Wireless Genie Mini Client (“WGM”)
to your Genie HD DVR.
1. Set up the WGM at its location.
2. Verify wireless network connection & signal strength.
3. Add the WGM Client.
4. Finish the Add a Client setup.
5. Confirm the Client(s) on your Genie HD DVR & Enjoy DIRECTV!
You can also find more information online at directv.com/wirelessgeniemini.
To Next Page
Loading...
