• The WGM must be placed at least four (4) feet away from the Wireless Video Bridge.*
• Avoid placing your WGM in a location with potential signal interference such as in a room with
thick walls/ceilings, or near your home computer network router, cordless phone or
metal objects.
If your TV does not have an HDMI port, you can order component or composite cables by calling
DIRECTV Customer Care at 1-800-531-5000 or go to directv.com.
Step 1. Set up the Wireless Genie Mini at its location.
• Connect the power cord to the WGM and plug it in to an electrical outlet.
• Connect the HDMI cable between the WGM and your TV.
• Power on the WGM and the TV.
:: NOTE
:: NOTE
1
* The Wireless Video Bridge was part of your original Genie installation with your Genie HD DVR (HR34, HR44 and above).
To Next Page
Loading...
