Genie GRC-12 Operator's Manual

Operator's Manual First Edition • First Printing
38 GRC-12 Part No. 133136
GRC-12
Height, working maximum 5.5 m
Height, platform maximum 3.7 m
Height, stowed maximum 169.5 cm
Height, stowed maximum 169.5 cm
standard platform with
work station tray
Width 80 cm
Length, stowed 137.2 cm
Standard platform 140 x 74.9 cm
with extension extended
Standard platform 99 x 74.9 cm
with extension retracted
Maximum capacity, 227 kg
standard platform
Maximum capacity, 113 kg
extension deck
Maximum wind speed 0 m/s
Turning radius (inside) 0 cm
Turning radius (outside) 134.6 cm
Ground clearance 6.4 cm
Weight 948 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Power source 4 Batteries, 6V 225AH
Controls Proportional
AC outlet in platform Standard
Maximum hydraulic pressure 207 bar
(functions)
Tire size 25.4 x 7.6 x 2.5 cm
Airborne noise emissions <70 dB
Maximum sound level at normal operating workstations
(A-weighted)
Vibration value does not exceed 2.5 m/s
2
Maximum slope rating,
stowed position 30% (17°)
Maximum side slope rating 30% (17°)
Note: Slope rating is subject to ground conditions and
adequate traction.
Drive speeds
Stowed, maximum 4.0 km/h
12.2 m/10.9 sec
Platform raised, maximum 0.8 km/h
12.2 m/55 sec
Floor loading information
Tire load, maximum 381 kg
Tire contact pressure 9.09 kg/cm
2
891.01 kPa
Occupied floor pressure 880.15 kg/m
2
8.63 kPa
Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with
adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.
Specifications

Genie GRC-12 Specifications

General

Brand	Genie
Model	GRC-12
Category	Lifting Systems
Language	English